Performance and advantages of high-speed vortex multi-purpose pulverizer
Compared with the same type of pulverizer, the output is greatly improved (20%-50% increase) under the same power consumption, and energy consumption is saved.
A dust collecting device is added, which effectively reduces dust pollution.
Turning off the fan discharge reduces the labor intensity of the operators.
The door cover of the host can be opened for easy maintenance and tool replacement.
The use of wind and water double cooling can better reduce the working temperature in the machine body, and the ground material is not easy to change. At the same time, it is also conducive to the grinding of heat-sensitive plastics. Part of PE and ABS can be ground.
The principle of high-speed vortex multi-purpose mill
The working part of this machine is the cutter head. The high-speed particles are partially crushed after impacting the tooth plate and the tooth piece, and are drawn out by suction, while the larger particles continue to impact, and are drawn out after crushing. This reduces the load on the cutter head, improves the grinding efficiency, and enables the powder to be evenly cooled.
The main feature of this machine when the temperature is low. In terms of thermal power equivalent: it converts to 860 kcal of heat per hour of work done. This machine is externally exhausted, and the air volume reaches 1704m3/h. The temperature difference between the inlet and outlet air takes away most of the heat, and a small part of the heat is cooled by water. The inlet temperature of cold water is required to be no more than 25 degrees Celsius, and the temperature of the outlet water is no more than 45 degrees Celsius. Increase the cooling water flow appropriately in summer to lower the temperature.
High-speed eddy current multi-purpose pulverizer
Used for low-to-medium hardness PVC plastics, high-density PE and other plastics that have been successfully tested. It is proved by the practice operation of a professional plastic product factory that 20%-30% calcium carbonate is added to the grinding powder in the processing and recycling. The chemical and physical properties of the product remain unchanged, and the output can reach 300kg/h. , This equipment room is the best equipment for plastic products factory to reduce costs and reduce waste and solve the accumulation of waste products.
Technical parameters of high-speed vortex multi-purpose pulverizer:
1. Diameter of the crushing chamber: φ390mm
2. Number of rotors: 3
3. Spindle speed: 3400-3700rpm
4. Motor power: 30kw
5. Crushing capacity: 50-150kg/h
6. Dimensions: 1250×1500×1530 (body) 100×1000×1015
7. Weight: 1000kg
