Features of hybrid dryer:
When the ordinary dryer is drying, because the raw material is still, the hot air penetration is insufficient, and it is only heated locally, and the raw material is easy to agglomerate and cause blockage.
Therefore, the overall drying effect cannot be achieved.
The design of the mixing dryer is a two-stage spiral rapid conveying. The first stage delivers the raw materials quickly into the barrel, and the second stage quickly lifts the raw materials to the upper end of the barrel and throws them in an umbrella shape, while the hot air is discharged from the barrel. The center of the lower part blows out to the surroundings, and smoothly penetrates the raw materials from the bottom up through the gaps of the moving raw materials for a dynamic drying process of comprehensive heat exchange.
Because the raw materials are constantly tumbling in the barrel, the hot air is continuously transported from the center to achieve simultaneous mixing and drying, saving time and energy.
If you don’t need to dry, just turn off the drying switch and only use the mixer function. This machine is also suitable for mixing barrels of pellets, pulverized materials, masterbatch, and spiral blades, shafts, cylinders, brackets, etc., which are in contact with raw materials. Evenly made of stainless steel.
When the material needs to be cleared, the clearing port can be opened, and the screw can be reversed to start the drying fan, which can achieve the simple operation of clearing the material.
